Virelox
1 / 5
| NO. | Name | Specification | Quantity | Number |
|---|---|---|---|---|
| 1 | Open cone | Open cone | 1 | 90010001 |
| 2 | Circuit breaker | Straight circuit breaker Φ3.2 | 1 | 90010003 |
| 3 | Circuit breaker | The circuit breaker is 3.5 | 1 | 90010004 |
| 4 | Circuit breaker | Straight circuit breaker Φ2.5 | 1 | 90010002 |
| 5 | Bone probe (hard) | Bone probe (hard) | 1 | 90010201 |
| 6 | Double-ended probe | 300 | 1 | 90010005 |
| 7 | tap | Thread Tap 4.5 | 1 | 90010006 |
| 8 | tap | Thread Tap 5.5 | 1 | 90010007 |
| 9 | tap | Tap 6.5 | 1 | 90010008 |
| 10 | tap | Thread Tap 7.5 | 1 | 90010009 |
| 11 | Quick-load handle | Vertical ratchet handle | 2 | 90010105 |
| 12 | nailer | Universal nail driver M9 | 1 | 90010060 |
| 13 | nailer | Single spindle nail driver M9 | 1 | 90010061 |
| 14 | nailer | Reset gimbal screwdriver M9 | 1 | 90010101 |
| 15 | nailer | Reset uniaxial pin driver M9 | 1 | 90010102 |
| 16 | Quick-load handle | T quick change handle | 1 | 90010062 |
| 17 | Orthopedic clamp | Plum plug driver | 1 | 90010063 |
| 18 | Orthopedic wrench | Extended plum plug driver | 1 | 90010103 |
| 19 | Bone measuring apparatus | Die Rod (25mm) | 1 | 90010223 |
| 20 | Bar bending pliers | Bar bending pliers | 1 | 90010213 |
| 21 | Rod holding forceps | Rod holding Pliers 5.5 | 1 | 90010069 |
| 22 | Reset forceps | Rocking Pliers 5.5 | 1 | 90010072 |
| 23 | Reset forceps | Long tail Nail Swinging Pliers 5.5 | 1 | 90010073 |
| 24 | Counter wrench | Counter Sleeve 5.5 | 1 | 90010108 |
| 25 | Orthopedic wrench | Final lock driver SW6.35 | 1 | 90010075 |
| 26 | Orthopedic strip | Domino plum starter | 1 | 90010076 |
| 27 | Curved spreader pliers | Curved spreader pliers | 1 | 90010036 |
| 28 | Curved pressure forceps | Curved pressure forceps | 1 | 90010037 |
| 29 | Orthopedic wrench | Spinner wrench SW4,.0 | 1 | 90010217 |
| 30 | Pedicle screw tail cutter | Long arm nail breaker | 1 | 90010107 |
| 31 | Orthopedic wrench | Plum screwdriver 5.5 | 2 | 90010086 |
| 32 | Torque handle | 12.5 N · m | 1 | 90010090 |
| 33 | Orthopedic wrench | Lengthened plum screwdriver | 1 | 90010104 |
| 34 | Connect the driver horizontally | SW3.5 | 1 | 90010025 |
| 35 | Diameter ruler | Measuring ruler | 1 | 90010093 |
| 36 | Medical ruler | Transverse measuring stick | 1 | 90010094 |
| 37 | Pedicle locator | Pedicle locator | 1 | 90010095 |
| 38 | Guide needle | columnar | 4 | 90010096 |
| 39 | Guide needle | spherical | 4 | 90010097 |
| 40 | Orthopedic clamp | Transverse joint forceps | 1 | 90010041 |
| 41 | Implant rod press into rod | Rod Press 5.5 | 1 | 90010070 |
| 42 | Rod holding forceps | Strong rod holding pliers | 2 | 90010079 |
| 43 | Vertebral reset device | Sagittal plane in situ rod Bender (left) 5.5 | 1 | 90010081 |
| 44 | Vertebral reset device | Sagittal plane in situ rod bender (right) 5.5 | 1 | 90010082 |
| 45 | Bone measuring apparatus | Die rod 50cm | 1 | 90010067 |
| 46 | Reset forceps | Frog reduction Forceps 5.5 | 1 | 90010071 |
| 47 | sleeve | Reset sleeve B 80 | 1 | 90010084 |
| 48 | Spinal implant pusher | Side bar loader 5.5 | 1 | 90010087 |
| 49 | Spinal implant pusher | Side upper rod handle 5.5 | 1 | 90010088 |
| 50 | Spinal implant pusher | Step press Bar T-handle SW14 | 1 | 90010089 |
| 51 | - | Instrument box | 1 | 90010098B |
Would you please give some information on shipping mode and charges?
Normally we send through courier like DHL, FEDEX, UPS, TNT etc or post upon request from clients.
Do you have ISO9001, ISO 13485, CE approvals?
Normally we send through courier like DHL, FEDEX, UPS, TNT etc or post upon request from clients.
What is the minimum order that we can place? Do you provide free samples?
We expect your minimum orders to be least at US$500. However, we understand that customers need to place smaller samples orders in the beginning in order to test market our products. We could offer the free samples, but do not pay the cost of freight.
Can I buy products not shown but similar to your catalogue?
Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
Do you have stock for listed products, or they are newly produced? What are your terms of payment?
Generally, we have stock for every listed products, which were produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information. Payment<=800USD, 100% in advance. Payment>800USD, 30% T/T in advance, balance before shipment. Payment methods are via L/C, T/T, Western Union, PayPal etc.
